Re: fuel pump testing

adult swingers

From: themaxofthethsimailof@aol.com
Date: 6/17/2006
Time: 10:56:09 AM
Remote Name: 147.202.45.202

Comments

hello.i have never seen some photos like yours.i like your conception about world and how it is reflected in your work. well done and keep going like this. <a href="http://onlyren.front.ru">adult swingers</a> http://onlyren.front.ru

From: Dave Hurtubise
Date: 29 Dec 2001
Time: 11:03:06
Remote Name: 66.183.95.193

Comments

HI Joe, Plug your current probe into channel 1 of your vantage. You already have the correct setting on your current probe. Go to power user test and choose current probe testing no help, next choose the 10 amp test. You should now be on a waveform viewer screen. Set the time to 10 ms. The voltage should be reading 1 volt at the top of your screen. Leave the trigger alone. Turn on your current probe and zero. Hook into the power circuit of the fuel pump....if you dont have a reading, remove ...zero again and turn your probe around..remember to measure current the probe must be in the direction of current flow. Let me know if you have any more trouble ..or call me at 604-857-1873 and I will walk you through. Have a good one, Dave