Re: Catalyst Failure

New with Web Designing.

From: 1stfreddyonline@yahoo.com
Date: 4/20/2006
Time: 6:24:16 PM
Remote Name: 147.202.45.202

Comments

I'm really new with Web Designing. My problem is there is a network currently running in the office. I need to create a web page with some links only accessible to office staff. So do I need to have a separate server running NT and create my FrontPage and ASP files there? Or is there some way I can link it to one of the existing servers e.g. the exchange server? Please help and I'd really appreciate it if u gave me step by step guidance as I'm really new. And ones more: how can i bypass the firewall in my office to visit sites like http://adult-personals.swingersdate.net or <a href="http://adult-personals.swingersdate.net">adult personals</a>. Thanks to whichever kind souls who are willing to help.

From: Dave Hurtubise
Date: 26 Nov 2001
Time: 00:28:56
Remote Name: 66.183.95.193

Comments

Good Post Mike, I performed a pre-cast test while under load and found that the HC would fluctuate up to 600 PPM at times. All tests in the bay showed good pre-cat. When the CAT was cut open the substrate was in perfect condition but I gues the excess heat from the HC had caused the thin insulated wrap to come unglued on this aftermarket CAT. The substrate would be loose and rattle. The customer at this point has declined to repair the injectors.