Advanced Computer Electronic Controls
Course helped in achieving more knowledge about different sensors and wiring circuits and how to diagnose faulty sensors etc. Instructor gave nice instruction because of his experience in the field. Yes I would recommend to others.
Jetender Sandhu
HJ Auto Repair Ltd., Surrey
I learned a lot in a short amount of time. The quality of the instructor is very good, he knows what he is talking about Good Job Mike! Hope to see you in other courses. I would recommend this course to other Techs.
Terry Lee
Low's Tire & Auto Repair, Surrey
I enjoyed the diagnostics and the shop practical the best. The hands on is what I always remember. Mike is a good instructor.
Tom Poelman
Tom's Tune-Up & Brake, Surrey
This course gave me the start to look at the operation of the component by itself first. I found Dave to be very knowledgeable and accurate. I would recommend this course and further courses to any Technician that wants to do diagnostics. I found this course very interesting and very much an eye opener. I wish I had more scope and meter experience first.
Rod Gillies
Innisfail 20/20 Auto Service , Innisfail Alberta
I was glad to see the Instructions were technical yet were explained in a very basic, easy to understand method. I now have a good understanding of the Computer system and how it works. I would definitely recommend this course to others. I enjoyed this course very much.
William Crowson
Innisfail 20/20 Auto Service, Innisfail Alberta
Dave is an excellent down to earth Instructor. His instruction is complete and accurate. I recommend this course to every Technician. Learning where to start and how to look at the sensors was a real eye opener and a true benefit. I feel I can now cut my diagnosis time in at least half.
Thanks so much
Kris Riep
Brian's Service Center, Trochu, Alberta
I found the course to be very informative and up to date. The course outline was very clear and not misleading. I would recommend this course to all Technicians.
Wayne Haarstad
D & E Service Station, Lacombe Alberta
I found the thorough explanation of devices and circuits to be very beneficial. The instruction was excellent and the course was done at a level which was appropriate to the students taking the course. I will definitely recommend this course to any one.
Dave Reinhardt
Dick's Auto Service, Didsbury Alberta
Great Course!! You obviously Eat, Breath and Sleep this stuff. Tons of info and practical ways of testing. I appreciate your style and am humbled by your knowledge. I will make an effort to promote your classes and hope to attend more of your courses.
Dana Fisher, Instructor
Olds College, Olds Alberta
I enjoyed this course as much as the Vantage course. I always learn lots of valuable things. You tend to teach from the basics and up with lots of hands on knowledge.
Thanks again
Ken Hewitt
Kartunes Repair Center, Edmonton
June 9, 2002
Advanced Computer Electronic Controls has been the first course that has given me invaluable information to understand and diagnose today's advanced computer control Vehicles. Taking this course has made me a better and smarter as an Automotive Technician. I look forward to my next course from Hi-Tek Training by Dave Hurtubise.
Tony Glumpak
Sandy Lane Auto, Edmonton
June 9, 2002
This is the second course taken with Dave at Hi-Tek Training. I'm still very impressed! Lots of good instruction - Great Course!
Ron Owerko
Intregra Automotive, Edmonton
June 9, 2002
Great Course! Plenty of information and useful tips. Required for the real world!!
Mike Hoyt
Automotion Automotive, Edmonton
June 9, 2002
A great mind opener to help me with day to day job use. The whole course was well worth it and I would strongly recommend the course.
Clay Mann
All Tec Autocare, Edmonton
June 9, 2002
Excellent quality course for Diagnostic flow. Mike was able to answer all of my course related questions to the point I fully understood.
Don Bakes
AD Autotechs Automotive, North Van
June 18, 2002
Almost everything we did benefited me. I learned a great deal when it as through. Quality of instruction was great. It's good when the instructor makes you think. I would recommend this course to almost anyone in the occupation - it absolutely helped me.
Chris Greenlees
AD Autotechs Automotive, North Van
June 18, 2002
I would recommend this course and other courses that are offered by Hi-Tek Training. The quality of the instruction was great. I benefited from the theory part of the course, it showed how sensors worked and how to apply that knowledge to a variety of different vehicles.
Gurdeep Bhatti
Sals Motors, North Van
June 18, 2002
Excellent Instruction, great explanation of how to test / simulate sensors. I feel more comfortable diagnosing vehicles now.
Gord Ryall
S M D Auto, North Van
June 18, 2002
The course was great, gained a lot of knowledge. I picked up a lot of important information.
The instructor had a lot of knowledge and is also a mechanic. I will be back
Al Mawji
MST Automotive, Coquitlam
September 25, 2002
Excellent instruction, well thought out course. Finally fully understand a Hall Effect Switch.
Greg Buerk
Comolake Shell, Coquitlam
September 25, 2002
Instructor very competent. Explains course well. Would definitely recommend Hi-Tek to others. Very informative classes. It's the second time I have attended Hi-Tek Training courses and hope to attend again soon.
John Levan
S & M Auto Import service, Vancouver
September 25, 2002
The course was excellent, Mike used real life, in the field diagnostics and examples - not like a text book. I would recommend this course to any Tech. I look forward to the next Hi-Tek course and will continue to send my Techs and myself to them.
Thank You
John McCafferty
John's Thistle Automotive, Ladner
O2 sensor diagnostics. Better understanding of all inputs and outputs. Instructor was excellent in applying real life diagnostic situations. Yes I will recommend course. More Lab Scope and Vantage practice.
Michael Kianianfard
Bill's Automotive, Vancouver
Learned to test most electronic sensors in computer controls. Instructor was excellent. I highly recommend it to any one in the Automotive trade.
Pietro Manfredi
Champlain Petro Canada, Vancouver
Being able to learn how to test the various sensors & switches and other electrical devices on the vehicle. The quality of instruction was excellent. I would definitely recommend this course to lots of people. I would also like to do more courses with Hi-Tek. I enjoyed it even though it was lot's of information to absorb.
Dan Caruso
AMCO Auto Centre Transmissions, Prince George
June 7, 2003
How to recognize sensor, Motors, Solenoids, and how to approach on how to test them on the car. Dave was excellent!! Yes I would recommend this course to others. It's a lot to learn.
Deryl Loth
City of Prince George
June 7, 2003
I got a more in depth understanding of the electrical systems and way of testing. Instruction was good, informative, and well laid out. I would recommend this and I am interested in taking other courses with Hi-Tek Training.
Joe Heffernan
J C Auto, Prince George
June 7, 2003