Emissions Trouble-Shooting Through 5 Gas Analysis Level II
I thought this course covered in great detail the inter-relationship between the combustion gases and how to diagnose emissions problems by studying and comparing them. The instruction was put forth clearly and concisely. I would recommend this course to others.
Norm Winter
Vancouver Transmissions, Surrey
February 20, 2003
Very good instruction ( knows what he is talking about). I would recommend this course to others and would like to take other courses myself.
Milan Rukavina
Midway Excel Tire, Surrey
February 20, 2003
This course gave lots of practical information which can be applied to real world, in the shop situations. Good helpful instruction. I would recommend this course.
Bill Vanderbos
Ambassador Ok Services, Surrey
February 20, 2003
A better understand of catalytic converter test procedures and reading the drive trace reports very informative instruction. The work book manual information will be very useful. I would recommend this course to others.
Alan Sakamoto
Nobby's Service Ltd., Richmond
March 20, 2003
The instructor for the course was very good and I would recommend this course to other mechanics. His experience and knowledge helped to look at emission problems using the IM240 drive trace. Also different ways to analyze the information using graphs which was very good. The different methods to check catalytic efficiency and to use a diagnostic routine to check vehicles.
Gurdeep Bhatti
P. Larsen Automotive, North Vancouver
March 20, 2003
Proper way of analyzing drive trace. The course was full of Real failures and repairs. Good discussions of different repairs. Instructor very knowledgeable and easy to understand and talk to. I would recommend this course to anyone interested in diagnostic and or air care work.
Mark McCafferty
John's Thistle Automotive, Ladner
March 20, 2003
Mike showed us a unique way to graph emissions readings and how they interrelate to obtain diagnostic direction when dealing with IM240 test failures. The methods shown are not obtainable anywhere else that I have been. The course is well worth it, to be able to look through the eyes of an expert when dealing with air care failures.
Harvey Chan
Canadian Tire, Vancouver
March 20, 2003
The course was very informative. Had good explanation of Air Care drive traces and how to best to about analyzing the trace reports. The quality of instruction and course material was very good
Jason Boon
Bier Motors, Abbotsford
May 6, 2003
Understanding CO/HC/CO2/NOX relationships. Better ways to diagnose cats. Mike is very good at explaining this course. I would most definitely recommend this course.
P.S. Have course in Chilliwack------Please!!!
Carl Bier
Broadway Motors, Chilliwack
May 6, 2003
The course content and the instructor was excellent. This course should be a requirement for air care certification.
Scott Waddle
Precision Auto, Surrey
June 2, 2003
The base lining and attack of diagnosing benefited me greatly. I hope to use this method more. Instruction was great and informative and Mike did not criticize when you were wrong.
Great Job Mike!!!
Louie Tolnay
Precision Auto, Surrey
June 2, 2003
Most beneficial, percentage vs. mass emissions graphing, general class discussion. Excellent quality of instruction. I would highly recommend to technicians.
Joe Taylor,
Walnut Grove Auto Tech, Langley
June 2, 2003
Drive trace interpretation and plan of attack strategy was very useful. Loading cat in shop with snap throttle was excellent. Graphing with excel will be very helpful on trouble vehicles. LAMBDA explanation cleared up a lot of questions.
Jordan Woodley
Dave Foreman Auto Repair, Langley
June 2, 2003
Typical Hi-Tek training course, great course content, well prepared and researched material with excellent delivery. Cat diagnosis and the im240 was very useful. I think the course needs one more day, it is too hard to run past 9:30pm after working 11 or so hours. Also Level I should be a prerequisite so everyone is up to speed.
Greg Buerk
Como Lake Shell, Coquitlam
November 27, 2003
Gave me direction in performing repairs. Further knowledge of emissions repairs and air care. The instruction quality was great. Mikes methods of teaching, simplify complicated repairs. I would recommend this course to other people.
Thanks Mike
Matthew Higgins
Austin Blue Mountain, Coquitlam
November 27, 2003
Hi Dave
I thought I'd let you know that I have just received a Quality Repair award from Air care.
I wanted to thank you and Mike personally for helping to make this possible. The two courses that you taught that I attended are the foundation for my diagnostic skill. What I learned from you opened my eyes to the proper approach for diagnostics. I intend on improving my diagnostic skills thru taking more courses with Hi-Tek. I'm updating my resume and I hope that now I can find an employer who values advanced diagnostic techniques and the equipment to make it possible.
Thanks Again
George Allan
April 8, 2004
Every time I come to any of Hi-Tek Training courses, I always come away with more info and ability to do my job easier. The instruction is top notch and I have told many people about your courses.
Melvin Fix
Granville & Avery Automotive
September 14, 2004
It has helped me with, understanding the drive trace problem I have had in the past. He given me a clear vision for what to look for and which way they should be dealt with in each order.
Jim Grafos
Varsity Automotive
September 14, 2004
The best diagnostic order when approaching air care. How to read drive trace and SBS report. Written information very good, instructor knowledgeable and clear on training. I would recommend to someone in this field who wants to understand emissions.
Brian Brumeski
John's Automotive Repair
September 14, 2004